Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
CONFIG:ARB? mi
ght return 1, indicating that the hardware is present and the
feature is enabled.
CONFIGuration:AUXIN? (Query Only)
This query returns a boolean value to indicate whether the instrument has an
Aux Input connector.
NOTE. The MSO/DPO4000B series and 2-channel MDO3000 series models
contain an
Aux Input connector.
Group
Configuration
Syntax
CONFIGuration:AUXIN?
Related Commands
(See page 2-91, Vertical Command Group.)
Returns
<NR1> = 1 if the instrument has an Aux Input connector.
<NR1> = 0 if the instrument does not have an Aux Input connector.
CONFIGuration:BUSWAVEFORMS:ARINC429A? (Query Only)
This query returns a Boolean value to indicate whether the optional CAN-FD bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:ARINC429A?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-243

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English