Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
Returns
<NR1> = 1 if the A
RINC429 bus feature is present.
<NR1> = 0 if the ARINC429 bus feature is not present.
CONFIGuration:BUSWAVEFORMS:AUDIO? (Query Only)
This query returns a boolean value to indicate whether the optio
nal audio bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUDIO applicati
on module, or
MDO3AUDIO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:AUDIO?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> =1iftheaudiobusfeatureispresent.
<NR1> = 0 if the audio bus featu
re is not present.
CONFIGuration:BUSWAVEFORMS:CAN? (Query Only)
This query returns a boolean value to indicate whether the optional CAN bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUTO application module, or
MDO3AUTO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:CAN?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
2-244 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual