Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:RESET
Examples
ETHERnet:LXI:LAN:RESET resets the LXI local area network.
ETHERnet:LXI:LAN:SERVICENAMe
This command specifies the mDNS service name used for the LXI interface.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:SERVICENAMe QString
ETHERnet:LXI:LAN:SERVICENAMe?
Arguments
QString is a quoted string of up to 64 characters that specifies the mDNS service
name used for the LXI interface.
Examples
ETHERnet:LXI:LAN:SERVICENAMe? might return "Tektronix Oscilloscope
MSO4104B 053CVV"
ETHERnet:LXI:LAN:STATus? (Query Only)
This query returns the LXI network status.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:STATus?
Related Commands
ETHERnet:PING,
ETHERnet:PING:STATus?
Returns
OK — indicates the network is running and the oscilloscope ca
n“see”thenetwork.
FAULT — indicates the network is not visible, or the network settings are incorrect.
IDENTIFY indicates that a message is being displayed on the oscilloscope’s front
panel indicating which scope the user is currently accessing.
2-312 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual