Commands Listed in Alphabetical Order
ETHERnet:PIN
G:STATus? (Query Only)
Returns the results from sending the ETHERnet:PING command to ping the
gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING:STATus?
Returns
OK is returned if the computer at the gateway IP address answers.
NORESPOnsE is returned if the computer at the gateway IP address does not
answer.
INPROGRESS is returned if the ping operation is still executing.
NEVER is returned if ETHERnet:PING EXECute has not been previously
sent, indicating that no ping response has ever been received in response toan
ETHERnet:PING EXECute command since the instrument was powered on.
ETHERnet:SUBNETMask
This command specifies the remote interface subnet mask value.
Group
Ethernet
Syntax
ETHERnet:SUBNETMask <QString>
ETHERnet:SUBNETMask?
Related Commands
ETHERnet:NETWORKCONFig,
ETHERnet:IPADDress,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is the subnet mask value, enclosed in quotes.
Examples
ETHERNET:SUBNETMASK “255.255.255.0” sets the subnet mask value using
standard IP address notation format.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-315
To Next Page
Loading...
Need help?
General
