Commands Listed in Alphabetical Order
Group
Mask
Syntax
MASK:COUNt:VIOLATIONS?
Related Commands
MASK:COUNt:TESTS?, MASK:COUNt:WAVEFORMS?
Returns
<NR1>
Examples
MASK:COUNT:VIOLATIONS? might return: 250 showing that 250 test violations
have occurred.
MASK:COUNt:WAVEFORMS? (Query Only)
This query returns the number of waveforms that have been acquired and
processed during pass/fail mask testing.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:WAVEFORMS?
Rel
ated Commands
MASK:COUNt:TESTS?,
MASK:COUNt
Returns
Integer
Examples
MASK:COUNT:WAVEFORMS? might return: 1,000, showing that 1,000 waveforms
have been acquired and processed.
2-374 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
