Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
MATH[1]:VERTical:UNIts
Returns the math waveform vertical measurement unit value.
Group
Math
Syntax
MATH[1]:VERTical:UNIts?
Examples
MATH:VERTICAL:UNITS? might return MATH:VERTICAL:UNITS "joules "
indicating that the math vertical unit label for unknown values is joules.
MATHVAR? (Query Only)
Queries both numerical values you can use within math expressions.
Group
Math
Syntax
MATHVAR?
Related Commands
M AT H VA R : VA R < x > , MATH[1]:DEFine
Returns
<NR3> are the stored numerical values.
Examples
MATHVAR? returns the values of all variables stored in locations 1 through 2.
MATHVAR:VAR<x>
This command specifies one of two different numerical values you can use within
math expressions. These values can range from -10.0e-18 to 1.0e+15; the default
values are 0.0. <x> specifies the location, 1 or 2, in which you can store values.
Stored math variables can be referenced within math expressions as VAR1 and
VA R 2 .
For example, the following command defines MATH1 as the product of Channel
1andma
th variable 1: MATH1:DEFINE "CH1 * VAR1".
Group
Math
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-419

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English