Commands Listed in Alphabetical Order
Group
Miscellaneous
Syntax
PASSWord <QString>
Related Commands
NEWpass, *PUD
Arguments
<QString> is the password and can include up to 10 characters. The factory
default password is “XYZZY” and is always valid.
Examples
PASSWORD“XYZZY” enables the *PUD and NEWpass set commands.
PASSWORD disables the *PUB and NEWpass set commands. You can still use the
query version of *PUD.
PAUSe (No Query Form)
This command causes the interface to pause the specified number of seconds
before processing any other commands.
Group
Miscellane
ous
Syntax
PAUSe < NR3>
Arguments
<NR3> is a floating-point number that represents the number of seconds the
interface should pause before processing any other commands. It must be greater
than 0.0 and less than or equal to 1800.0.
Examples
PAUSE 2 .0 causes the interface to pause for 2 seconds before processing any
other commands.
PICTBridge:DATEPrint
Enables or disables printing the date on the print output
Group
PictBridge
Syntax
PICTBridge:DATEPrint {DEFLT|OFF|ON}
PICTBridge:DATEPrint?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-459
To Next Page
Loading...
Need help?
General
