Commands Listed in Alphabetical Order
Group
RF
Syntax
RF:MEASUre:ACPR:UA1DB?
Related Commands
RF:MEASUre:ACPR:ADJACENTPAIRs, RF:MEASUre:ACP
R:CHANBW,
RF:MEASUre:ACPR:CHANSPACing, RF:MEASUre:ACPR:POWer?,
RF:MEASUre:ACPR:LA1DB?, RF:MEASUre:ACPR:LA2DB?,
RF:MEASUre:ACPR:LA3DB?, RF:MEASUre:ACPR:UA2DB?,
RF:MEASUre:ACPR:UA3DB?
Examples
RF:MEASUre:ACPR:UA1DB might return –30.000, indicating that the Upper
Area 1 side channel (right side of Main channel) has 1/1000 the power of the
Main channel.
RF:MEASUre:ACPR:UA2DB? (Query Only)
This query measures a ratio between the second upper side channel and the
Main channel when performing ACPR measurements using a frequency domain
trace. The power in the adjacent channel is equivalent to the power in the main
channel (dBm) added to the power ratio (dB) of the adjacent channel. (The RF
measurement type must be set to ACPR using the command RF:MEASUre:TYPe.)
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:MEASUre:ACPR:UA2DB?
Related Commands
RF:MEASUre:ACPR:ADJACENTPAIRs, RF:MEASUre:ACPR:CHANBW,
RF:MEASUre:ACPR:CHANSPACing, RF:MEASUre:ACPR:POWer?,
RF:MEASUre:ACPR:LA1DB?, RF:MEASUre:ACPR:LA2DB?,
RF:MEASUre:ACPR:LA3DB?, RF:MEASUre:ACPR:UA1DB?,
RF:MEASUre:ACPR:UA3DB?
Examples
RF:MEASUre:ACPR:UA2DB might return –30.000, indicating that the Upper
Area 2 side channel (right side of the Main channel) has 1/1000 the power of
the Main channel.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-557
To Next Page
Loading...
Need help?
General
