Commands Listed in Alphabetical Order
Examples
RF:PROBE:AUTO
ZERO EXECute
performs the AutoZero function in the probe.
RF:PRObe:CALibrate (No Query Form)
This command executes a calibration or initialization for a probe attachedto
the RF input,
if the probe is calibratable. To determine whether the probe is
calibratable, use RF:PRObe:CALibrate:CALIBRATABLe?.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:PRObe:CALibrate {EXECute|INITialize}
Related Commands
RF:PRObe:CALibrate:STATE?, RF:PRObe:CALibrate:CALIBRATABLe?
Arguments
EXECute — executes a calibration for the attached probe.
INITialize — initializes the attached probe.
Examples
RF:PROBE:CALIBRATE INIT initializes the probe attached to the RF input.
RF:PRObe:CALibrate:CALIBRATABLe? (Query Only)
This query returns a boolean value that indicates whether the attached probe is
calibratable.
Conditions
MDO300
0, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:PRObe:CALibrate:CALIBRATABLe?
Examples
RF:PRObe:CALibrate:CALIBRATABLe? might return 0, indicating that the
probe attached to the RF input is not calibratable.
2-564 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
