Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4AUTOMAX application module for
DPO/MSO4000B and MDO4000/B/C models or MDO3FLEX application module
for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FL EXray:HEADER:FRAMEID
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FL EXray:HEADER:FRAMEID?
Arguments
<QString> is a quoted string representing the frame ID portion of the binary
header string used for a FlexRay search.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:FLEXRA Y:HEADER:FRAMEID
“10110010101”
sets the frame ID portion of the binary header string to
10110010101.
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:FLEXRA Y:HEADER:FRAMEID? might
return
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:FLEXRAY:H EADER:FRAMEID
"XXXXXXXXXXX"
indicating the frame ID portion of the binary header string
is don't cares.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits
This command specifies to use the indicator bits portion of the binary headerstring
when searching on the FlexRay bus header. The search condition needs to be set
to HEADer (using SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:
CONDition).
SEARCH<x> is the search number, which is always 1, and B<x>
Conditions
This command requires a DPO4AUTOMAX application module for
DPO/MSO4000B and MDO4000/B/C models or MDO3FLEX application module
for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FL EXray:HEADER:INDBits
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FL EXray:HEADER:INDBits?
Arguments
<QString> is a quoted string representing the indicator bits portion of thebinary
header string used in a FlexRay search.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-661

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English