To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Related Commands

SELect:CONTRO

l:SELect:CONTROl:SELect:D<0-15>

SELect:D<x>

Arguments

This command takes a Boolean argument, which means it can be used to either

turn all digital channels on or all digital channels off.

Examples

SELect:DAll 1 turns on all digital channels.

SELect:D<x>

Turns on the display of the digital channel <x> and resets the acquisition. <x > is

the channel number, which can be 0–15. The query returns whether the channelis

on or off but does not indicate whether it is the selected waveform.

Group

Vertical

Syntax

SELect:D<x> {<NR1>|OFF|ON}

SELect:D<x>?

Arguments

ON turns on the display of the speciﬁed waveform. This waveform also becomes

the selected waveform.

OFF turns off the display of the speciﬁed waveform.

<NR1> = 0 turns off the display of the speciﬁed waveform; any other value turns

on the display of the speciﬁed waveform.

Examples

SELECT:D2 ON turns the digital channel 2 waveform display on, and selects

digital channel 2.

SELECT:D2? might return : SELECT:D2 1 indicating that digital channel 2 is

being displayed.

SELect{:MATH|:MATH1}

Turns on and off the display of the math waveform. The query returns whether

the math waveform is on or off but does not indicate whether it is the selected

waveform.

Group

Vertical

MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-757

Tektronix MDO4000B Series User Manual

Other manuals for Tektronix MDO4000B Series