Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
TRIGger:A:LO
GIc:INPut:RF
This command specifies the logic level to use when the internal RF power levelis
the source for a logic pattern trigger.
Conditions
MDO4000/B and MDO4000C with option SA3 or SA6 only. Also requires
installation of an MDO4TRIG application module.
Group
Trigger
Syntax
TRIGger:A:LOGIc:INPut:RF {HIGH|LOW|X}
TRIGger:A:LOGIc:INPut:RF?
Related Commands
TRIGger:A:LOGIc:THReshold:RF,TRIGger:A:LOGIc:FUNCtion,
TRIGger:A:LOGIc:PATtern:WHEn
Arguments
HIGH specifies to trigger on a high logic level.
LOW specifies to trigger on a low logic level.
X specifies a “don't care” condition.
Examples
TRIGger:A:LOGIc:INPut:RF HIGH spec
ifies to trigger on a high logic level
when the internal RF power level is the source for a logic pattern trigger.
TRIGger:A:LOGIc:INPut:RF? might r
eturn X, indicating that it doesn’t matter
whether the logic level is high or low.
TRIGger:A:LOGIc:PATtern? (Query Only)
Returns the conditions used for generating an A logic pattern trigger, with respect
to the defined input pattern, and identifies the time that the selected pattern may
be true and still generate the trigger.
Group
Trigger
Syntax
TRIGger:A:LOGIc:PATtern?
Examples
TRIGGER:A:LOGIC:PATTERN? might return
:TRIGGER:A:LOGIC:PATTERN:INPUT:CH1 HIGH;CH2
LOW;CH3 X;CH4 X;:TR IGGER:A:LOGIC:PATTERN:WHEN
2-884 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English