Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
TRIGger:B:ED
GE:COUPling
This command specifies the type of coupling for the B edge trigger.
Group
Trigger
Syntax
TRIGger:B:EDGE:COUPling {DC|HFRej|LFRej|NOISErej}
TRIGger:B:EDGE:COUPling?
Related Commands
TRIGger:B:EDGE?
Arguments
DC selects DC trigger coupling.
HFRej selects high-frequency reject coupling.
LFRej selects low-frequency reject coupling.
NOISErej selects DC low sensitivity.
Examples
TRIGGER:B:EDGE:COUPLING DC selects DC for the B trigger coupling.
TRIGGER:B:EDGE:COUPLING? might return :TRIGGER:B:EDGE:COUPLING
HFR
which indicates that the B trigger type is set to high-frequency reject coupling.
TRIGger:B:EDGE:SLOpe
This command specifies the slope for the B trigger.
Group
Trigger
Syntax
TRIGger:B:EDGE:SLOpe {RISe|FALL}
TRIGger:B:EDGE:SLOpe?
Related Commands
TRIGger:B:EDGE?
Arguments
RISe triggers on the rising or positive edge of a signal.
FALL triggers on the falling or negative edge of a signal.
Examples
TRIGGER:B:EDGE:SLOPE FALL sets the B edge trigger to occur on the falling
slope.
2-922 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English