Commands Listed in Alphabetical Order
Arguments
DISabled disab
les the rear USB port.
IMAge enables the rear USB port as an SIC device.
USBTmc enables the rear USB port as a USBTMC device.
Examples
USBDEVICE:CONFIGURE IMAGE enables the rear USB port as an SIC device
USBDEVICE:CONFIGURE ? might return USBD EVICE:CONFIGURE USBT
indicating a USBTMC device.
USBTMC? (Query Only)
Returns the USBTMC information used by the USB hosts to determine the
instrument interfaces.
Group
Miscellaneous
Syntax
USBTMC?
USBTMC:PRODUCTID:DECimal? (Query O nly)
This query returns the product ID number as a decimal. The product ID numbers
vary for each instrument family and model. USBTMC stands for USB Test &
Measurement Class, a protocol that allows GPIB-like c
ommunication with USB
devices.
For product ID numbers, see the following table. (See
Table 1-3.)
Group
Miscellaneous
Syntax
USBTMC:PRODUCTID:DECimal?
Related Commands
USBTMC:VENDORID:HEXadecimal?
USBTMC:VENDORID:DECimal?
USBTMC:PRODUCTID:HEXadecimal?
USBTMC:SERIALnumber?
Examples
USBTMC:PRODUCTID:DECimal? might return a product ID value of 1033.
2-932 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
