Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
USBTMC:VENDO
RID:DECimal? (Query Only)
This query returns the vendor ID number as a decimal. The decimal vendor ID for
Tektronix instruments is 1689. USBTMC stands for USB Test & Measurement
Class, a prot
ocol that allows GPIB-like communication with USB devices.
Group
Miscellaneous
Syntax
USBTMC:VENDORID:DECimal?
Related Commands
USBTMC:VENDORID:HEXadecimal?
USBTMC:PRODUCTID:HEXadecimal?
USBTMC:PRODUCTID:DECimal?
USBTMC:SERIALnumber?
Examples
USBTMC:VENDORID:DECimal? might return a vendor ID value of 1689.
USBTMC:VENDORID:HEXadecimal? (Query Only)
This query returns the vendor ID number as a hexadecimal value. The
hexadecimal vendor ID for Tektronix instruments is 0x699. USBTMC stands for
USB Test & Measurement Class, a protocol that allows GPIB-like communication
with USB devices.
Group
Miscellaneous
Syntax
USBTMC:VENDORID:HEXadecimal?
Related Commands
USBTMC:PRODUCTID:HEXadecimal?
USBTMC:VENDORID:DECimal?
USBTMC:PRODUCTID:DECimal?
USBTMC:SERIALnumber?
Examples
USBTMC:VENDORID:HEXadecimal? might return a vendor ID value of 0x0699.
2-934 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual