Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
MDO3000 series
. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:LOCation:WIDth <NR1>
VIDPic:LOCation:WIDth?
Arguments
Integer that represents the video picture width, in columns. This value must be >=
1. The range for this value is 1 – 750. The default is 526.
Examples
VIDPIC:LOC:WID 348 sets the video picture width to 348 columns.
VIDPic:LOCation:X
Sets (or queries) the video picture X origin location, in columns.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires t
he DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:LOCation:X <NR1>
VIDPic:LOCation:X?
Arguments
Integer that represents the video picture X origin location, in columns, where
column 0 is the left-most edge of the display. The range for this value is 0 -749.
The default is 112 [ = (750 - 526) / 2 ].
Examples
VIDP:LOC:X 367 sets the video picture X origin location to column 367.
VIDPic:LOCation:Y
Sets (or queries) the video picture Y origin location, in rows.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-941

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English