Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
MDO3000 series
. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:LOCation:Y <NR1>
VIDPic:LOCation:Y?
Arguments
Integer that represents the video picture Y origin location, in rows, whererow0is
the top most edge of the display. The range for this value is 0 - 399. The default is
73. [ = (400 - 254) / 2 ].
Examples
VIDP:LOC:Y 367 sets the video picture Y origin location to row 367.
VIDPic:SOUrce
Sets (or queries) the channel to use for the video picture source waveform.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:SOUrce {CH1|CH2|CH3|CH4}
VIDPic:SOUrce?
Arguments
CH1|CH2|CH3|CH4 specify which channel to use for the video picture source
waveform.
Examples
VIDP:SOU CH3 specifies to use Channel 3 as the source waveform.
VIDPic:STANdard
Sets (or queries) which video picture standard to use (either NTSC or PAL).
2-942 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English