EasyManuals Logo
Home>Tektronix>Test Equipment>MSO24

Tektronix MSO24 User Manual

Tektronix MSO24
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Check shipped accessories
Make sure that you received everything you ordered. If anything is missing, contact T
ektronix Customer Support. In North America, call
1-800-833-9200. Worldwide, visit www.tek.com to find contacts in your area.
Check the packing list that came with your instrument to verify that you have received all standard accessories and ordered items. If you
purchased factory installed options such as a Serial Bus and Triggering option, tap Help > About to confirm that the options are listed in
the Installed Options table.
Item Quantity Tektronix part number
Installation and Safety Manual 1 071-3764-xx
TPP0200 200 MHz, 10x probe One per channel TPP0200
Instrument stand 1 N/A
Power cord 1 Depends on region
Calibration certificate 1 N/A
Report of factory installed licenses 1 N/A
Operating requirements
Use the instrument within the required operating temperature, power
, altitude, and signal input voltage ranges to provide the most accurate
measurements and safe instrument operation.
Table 1: Environment requirements
Characteristic Description
Temperature Operating instrument: 0°C to +50°C (+32°F to 120°F), with 5 °C/minute maximum gradient, noncondensing (NC)
Operating with battery: 0 °C to 45 °C (+32 °F to 113 °F)
For proper cooling, keep the rear of the instrument clear of obstructions for 2 inches (51 mm).
Operating
humidity
5% to 90% relative humidity at temperatures up to +30°C,
5% to 60% relative humidity at temperatures greater than +30°C and up to +50°C.
Operating altitude Up to 3000 meters (9842 feet)
Battery power Requires 2-BATPK battery pack with 2 slots for batteries to be ordered with instrument or 2-BP battery pack with 2
slots for batteries to be ordered post instrument purchase
Supports up to 2 TEKBAT-XX Li-Ion rechargeable batteries. Operating time; Up to 3 hours single battery and up to 6
hours dual batteries.
Tektronix recommends using the TEKCHG-XX external battery charger to charge the TEKBAT-XX batteries in
ambient environments greater than +30°C.
Table 2: Power requirements
Characteristic Description
Power source voltage 24 V DC
Power source current 2.5 A
Preface
16

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix MSO24 and is the answer not in the manual?

Tektronix MSO24 Specifications

General IconGeneral
BrandTektronix
ModelMSO24
CategoryTest Equipment
LanguageEnglish

Related product manuals