Appendix A: Specifications
A-10 SPG600 & SPG300 Sync Pulse Generators User Manual
Certifications and Compliances
Table A-12: Certifications and compliances
Category Standards or description
EC Declaration of Conformity-EMC Meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN55103 Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
Environmental E2-commercial and light industrial
Part 1 Emission
EN55022 Class B radiated and conducted emissions
EN55103-1, Annex A Radiated magnetic field emissions
EN55103-1, Annex B Inrush current; I peak=14.6 amps
Part 2 Immunity
IEC61000-4-2 Electrostatic discharge immunity
IEC61000-4-3 RF electromagnetic field immunity
IEC61000-4-4 Electrical fast transient/burst immunity
IEC61000-4-5 Power line surge immunity
IEC61000-4-6 Conducted RF immunity
IEC61000-4-11 Voltage dips and interruptions immunity
EN55103-2, Annex A Radiated magnetic field immunity
EN61000-3-2 AC power line harmonic current emissions
EN61000-3-3 Voltage changes, fluctuations, & flicker
EC-Declaration of Conformity-Safety Compliance was demonstrated to the following specification as listed in the Official Journal of
the European Union:
EN61010-1:2001 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
Australia/New Zealand Declaration of
Conformity-EMC
Complies with the EMC Framework, demonstrated per Emission Standard AS/NZS 2064
(Industrial, Scientific, and Medical Equipment).
Safety Complies with the following safety standards:
UL 61010B-1
CAN/CSA C22.2 No. 1010.1
IEC 61010 -1:2001 Second Edition
Installation (overvoltage) Category Terminals on this product may have different installation (overvoltage) category designations.
The installation categories are:
CAT III Distribution-level mains (usually permanently connected). Equipment at this level is
typically in a fixed industrial location.
CAT II Local-level mains (wall sockets). Equipment at this level includes appliances,
portable tools, and similar products. Equipment is usually cord-connected.
CAT I Secondary (signal level) or battery operated circuits of electronic equipment.
To Next Page
Loading...
Need help?
General
