Tektronix TDS1002 Programmer's Manual

Index
Index−2
TDS200/1000/2000 Series Oscilloscope Programmer Manual
message, 2-2
mnemonic, 2-2
*OPC, 3-14
query, 2-2
separator, 2-3
set, 2-2
synchronizing, 3-10
syntax, BNF (Backus-Naur
form), 2-1
*WAI, 3-11
Command argument
numeric, 2-10
quoted string, 2-11
Command entry rules, 2-5
Command group
acquisition, 2-15
calibration and diagnostic, 2-15
cursor, 2-16
display, 2-17
hardcopy, 2-18
horizontal, 2-18
math, 2-19
measurement, 2-20
miscellaneous, 2-21
RS-232, 2-22
save and recall, 2-23
status and error, 2-24
trigger, 2-25
vertical, 2-26
waveform, 2-27
Command mnemonic
CH<x>, 2-8
channel, 2-8
MEAS<x>, 2-9
measurement specifier, 2-9
REF<x>, 2-9
reference waveform, 2-9
waveform, 2-9
<wfm>, 2-9
Command syntax, BNF (Backus-
Naur form), 2-1
Common command, 2-24
Common GPIB commands
*CAL?, 2-46
CALIBRATE:CONTINUE, 2-47
CALIBRATE:FACTORY, 2-48
CALIBRATE:INTERNAL, 2-49
CALIBRATE:STATUS?, 2-49
*CLS, 2-56
communications modules, refer-
ences to, vi
Concatenating, commands, 2-6
Configuration, command query,
2-103
Cursor command group, 2-16
Cursor commands
CURSOR?, 2-57
CURSOR:FUNCTION, 2-57
CURSOR:HBARS?, 2-58
CURSOR:HBARS:DELTA?,
2-59
CURSOR:HBARS:POSI-
TION<x>, 2-59
CURSOR:HBARS:UNITS?,
2-61
CURSOR:SELECT:SOURCE,
2-61
CURSOR:VBARS?, 2-62
CURSOR:VBARS:DELTA?,
2-62
CURSOR:VBARS:POSI-
TION<x>, 2-63
CURSOR:VBARS:UNITS, 2-64
CURSOR?, 2-57
CURSOR:FUNCTION, 2-57
CURSOR:HBARS?, 2-58
CURSOR:HBARS:DELTA?, 2-59
CURSOR:HBARS:POSITION<x>,
2-59
CURSOR:HBARS:UNITS?, 2-61
CURSOR:SELECT:SOURCE,
2-61

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz