Tektronix TDS3000 Series Program Manual

Command Descriptions
2-84
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
CURSor:XY:PRODUCT<x>? (Query Only)
(Available with TDS3AAM)
Returns the value of the product readout for the specified XY cursor. XY display
mode, XY cursors, and Product readout must be enabled prior to executing this
command.
Cursor
CURSor:XY:PRODUCT<x>?
<x> specifies the XY cursor, where x = 1 for the reference cursor and x = 2 for
the delta cursor.
CURSOR:XY:PRODUCT1?
might return CURSOR:XY:PRODUCT1 2.23E2.
CURSor:XY:PRODUCT<x>, CURSor:XY:READOUT, DIS play:XY:MODe
CURSor:XY:RADIUS<x>? (Query Only)
(Available with TDS3AAM)
Returns the XY cursor radius value from the 0,0 origin to the specified XY
cursor. XY display mode, XY cursors, and Polar readout must be enabled prior
to executing this command.
Cursor
CURSor:XY:RADIUS<x>?
<x> , where x = 1 for the reference cursor and x = 2 for the delta cursor.
CURSOR:XY:RADIUS?
might return CURSOR:XY:RADIUS1 1.92E0.
CURSor:XY:READOUT, DISplay:XY:MODe
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples
Related Commands

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English