Tektronix TDS3000 Series Program Manual

Command Descriptions
2-114
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
OFF sets the Y Channel to off or none which turns off or prevents the CH1 versus
CH <x> waveform from being displayed in T riggered XY or prevents it from
comingonifTriggeredXYisturnedonlater.
DISPLAY:XY:YCHANNEL CH2
sets channel 2 to be displayed with channel 1 in Triggered XY mode.
DISPLAY:XY:YCHANNEL?
might return :DISPLAY:XY:YCHANNEL CH2 indicating that channel 2 will be the
Y channel in Triggered XY mode.
DISplay:XY:MODe, DISplay:XY:YREF, DISplay:XY?
DISplay:XY:YREF
Specifies the Y channel to be displayed with reference 1 in Triggered XY display
mode.
Display
DISplay:XY:YREF { REF2 | REF3 | REF4 | OFF }
DISplay:XY:YREF?
REF2 , REF3,andREF4 specify the reference displayed with REF1 in Triggered
XY Display mode.
OFF set the Y reference to off which turns off or prevents the REF1 versus
REF<x> waveform from being displayed in Triggered XY or prevents it from
comingonifTriggeredXYisturnedonlater.
DISPLAY:XY:YREF REF2
sets REF2 to be displayed with REF1 in Triggered XY mode.
DISplay:XY:MODe, DISplay:XY:YCHannel
DISplay:XY:ZCHannel
Specifies the Z channel to use in gated XYZ mode. Gated XYZ is similar to
analog oscilloscope modulated XYZ mode except that the displayed XY signal is
Examples
Related Commands
Group
Syntax
Arguments
Examples
Related Commands

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English