Command Descriptions
2- 122
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
ETHERnet:NETPRInter:DELWarn
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
Sets or returns the oscilloscope on-screen printer delete warning message. No
deletion warning message is sent over the network.
Ethernet
ETHERnet:NETPRInter:DELWarn { OFF | ON | <nr1> }
ETHERnet:NETPRInter:DELWarn?
OFF turns off delete warning
ON turns on delete warning
nr1 is an integer number where nr1 = 0 turns off delete warning, and nr1 ≠0
turns on delete warning.
ETHERNET:NETPRINTER:DELWARN 1
sets the oscilloscope to display a warning message on the oscilloscope screen
whenever a front-panel delete printer action occurs.
ETHERnet:NETPRInter:REName (Set Only)
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
Renames the specified printer name and/or parameters in the oscilloscope
ethernet printer list.
Ethernet
ETHERnet:NETPRInter:REName <QString>,<QString>
<QString> is a quoted composite string that contains, in the following order, the
network printer name, printer server name, and print server IP address. Each field
is delimited by a semicolon (;). The printer name is always required, and either
the server name or server IP address is required. If you do not use all three fields,
the missing field delimiter must still be used. The first Qstring is the original
printer information, and the second Qstring is the new printer information.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
To Next Page
Loading...
Need help?
General
