Command Descriptions
2- 124
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
ETHERnet:PASSWord (Set Only)
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
This command sets the Ethernet access password.
Ethernet
ETHERnet:PASSWord ”old”,”new”
old is the current password, enclosed in quotes. If there is no current password,
enter a null character (two quotes with no character between).
new is a new password, enclosed in quotes.
ETHERNET:PASSWORD ”karma2”,”ZEN53
replaces the current Ethernet password karma2 with the new password ZEN53.
ETHERnet:PING:EXECUTE (Set Only)
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
This command tests the Ethernet connection by performing a ping operation.
Ethernet
ETHERnet:PING:EXECUTE
ETHERNET:PING:EXECUTE
sets the oscilloscope to execute a ping operation to attempt to identify itself on
the Ethernet.
ETHERnet:PING:STATUS
ETHERnet:PING:STATUS? (Query Only)
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
This command returns the last-issued status message from the Ethernet Ping
command.
Group
Syntax
Arguments
Examples
Group
Syntax
Examples
Related Commands
To Next Page
Loading...
