Command Descriptions
2- 132
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
<directory path> is a quoted string that defines the directory. Input the
directory using the form <drive>/<dir>/<directory name>. <drive> and one
or more <dir>s are optional. If you do not specify them, the oscilloscope will
create the directory in the current directory. <directory name> stands for a
directory name of up to 8 characters and can be followed by a period (“.”) and a
3-character extension.
The current directory refers to the name of a directory as returned by the
FILESystem:CWD query.
FILESYSTEM:MKDIR “NEATPICS”
creates the directory named NEATPICS in the current directory.
FILESystem:OVERWrite
Turns on or off the front panel file-overwrite protection. Turning on file-over-
write protection prevents writing over existing files. Overwrite Lock has no
effect on commands received via the remote interface.
File system
FILESystem:OVERWrite { ON | OFF | <NR1> }
FILESystem:OVERWrite?
ON or <NR1> ¸ 0 turns on the file-overwrite protection.
OFF or <NR1> = 0 turns off the file-overwrite protection.
FILESYSTEM:OVERWRITE OFF
lets you overwrite existing files.
FILESYSTEM:OVERWRITE?
might return 1 indicating you cannot overwrite existing files.
Arguments
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
