Command Descriptions
2- 152
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
ITU601:EDH:NUMERRors? (Query Only)
(TDS3000B and TDS3000C Series with TDS3SDI Only)
Returns the number of errors stored in the TDS3SDI EDH error counter.
TDS3SDI
ITU601:EDH:NUMERRors?
ITU601:EDH:NUMERRORS?
might return the response ITU601:EDH:NUMERRORS 0, indication that the EDH
error counter value is zero (no errors).
ITU601:INPUT:FORMat
(TDS3000B and TDS3000C Series with TDS3SDI Only)
Sets or returns the TDS3SDI 601 digital video input signal format.
TDS3SDI
ITU601:INPUT:FORMat { AUTO | F525 | F625 | <NR1> }
ITU601:INPUT:FORMat?
AUTO or <NR1> ≥ 3 sets the oscilloscope to automatically detect and set the input
signal format.
F525 or <NR1> ≤ 1 sets the oscilloscope to trigger on 525-line 601 digital video
signals.
F625 or <NR1> = 2 sets the oscilloscope to trigger on 625-line 601 digital video
signals.
ITU601:INPUT:FORMAT AUTO
sets the oscilloscope to automatically detect and set the 601 digital video signal
input format.
Group
Syntax
Examples
Group
Syntax
Arguments
Examples