Tektronix TDS3000 Series Program Manual

Command Descriptions
2- 192
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
MASK:TESt:THReshold
(Requires TDS3TMT)
Sets or returns the maximum number of tested waveforms that are allowed to fail
during each pass/fail test before the pass/fail test status changes from PASSING
to FAILING.
Mask
MASK:TESt:THReshold <NR1>
MASK:TESt:THReshold?
<NR1> is an integer number that sets the maximum number of tested waveforms
that can fail during each pass/fail test before the test fails.
MASK:TEST:THRESHOLD?
might return MASK:TESt:THReshold 32
MASK:TESt:WAVEform
(Requires TDS3TMT)
Sets or returns the number of waveforms to test during pass/fail testing. If
Averaging is on, this is the number of averaged waveforms to test during
pass/fail testing.
Mask
MASK:TESt:WAVEform <NR1>
MASK:TESt:WAVEform?
<NR1> is an integer number that sets the number of tested (sampled or averaged)
waveforms to test for each pass/fail test.
MASK:TEST:WAVEFORM?
might return 500.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English