Tektronix TDS3000 Series - Page 239

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 201
horizontal scale of a dual math waveform with a channel source waveform is set
through the HORizontal:SCAle command.
Math
MATH:HORizontal:SCAle <NR3>
MATH:HORizontal:SCAle?
<NR3> is the math horizontal scale in seconds.
MATH:HORIZONTAL:SCALE?
might return :MATH:HORIZONTAL:SCALE 2.0E-4 indicating that the math
horizontal scale is 200 s.
MATH:HORizontal:UNITs
Sets or returns the math waveform horizontal measurement unit value.
Math
MATH:HORizontal:UNITs <Qstring>
MATH:HORizontal:UNITs?
<Qstring> is a text label to apply to horizontal units when the horizontal unit is
“?” (unknown unit value).
MATH:HORIZONTAL:UNITS?
might return :MATH:HORIZONTAL:UNITs ”?” indicating that the math horizontal
unit label for unknown values is the default question mark unit.
MATH:SPECTral:MAG
Sets or returns the FFT math waveform vertical display scale.
Math
MATH:SPECTral:MAG { DB | LINEAR }
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples
Group
Syntax