Tektronix TDS3000 Series - Page 290

Command Descriptions
2- 252
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
REM (No Query Form)
Specifies a comment. This line is ignored by the instrument.
Miscellaneous
REM <QString>
<QString> is a string that can have a maximum of 255 characters.
REM ”This is a comment”
is ignored by the instrument.
*RST (No Query Form)
*RST returns the instrument settings to the factory defaults (see Appendix D:
Factory Initialization Settings).
The *RST command does not alter the following:
H The state of the IEEE Std 488.1--1987 interface.
H The selected IEEE Std 488.1--1987 address of the oscilloscope.
H Calibration data that affect device specifications.
H The Output Queue.
H The Service Request Enable Register setting.
H The Standard Event Status Enable Register setting.
H The Power-on status clear flag setting.
H Alias definitions.
H Stored settings.
H The *PUD? response.
Status and Error
FACtory, *PSC, *RCL, RECAll:SETUp, *SAV, SAVe:SETUp
*RST
Group
Syntax
Arguments
Examples
Group
Related Commands
Syntax