EasyManua.ls Logo

Tektronix TDS3000 Series - Page 317

Tektronix TDS3000 Series
418 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 279
TRIGger:A:PULse:RUNT? (Query Only)
Returns the runt pulse trigger settings.
Trigger
TRIGger:A:PULse:RUNT?
TRIGGER:A:PULSE:RUNT?
might return :TRIGGER:A:PULSE:RUNT:THRESHOLD:HIGH 2.8000000000;LOW
0.7000000000;:TRIGGER:A:PULSE:RUNT:WHEN LESSTHAN;WIDTH
0.0000011880.
TRIGger:A:PULse:RUNT:POLarity
Sets or returns the runt-pulse logic trigger signal polarity value.
Trigger
TRIGger:A:RUNT:PULse:POLarity { EITher | POSITIVe | NEGAtive }
TRIGger:A:RUNT:PULse:POLarity?
EITher sets the oscilloscope to trigger on either POSITIVe or NEGAtive polarity
runt signals.
POSITIVe sets the oscilloscope to trigger only on positive-polarity runt pulses.
NEGAtive sets the oscilloscope to trigger only on negative-polarity runt pulses.
TRIGGER:A:PULSE:POLARITY NEGATIVE
specifies that the oscilloscope only trigger on negative-polarity runt pulses.
TRIGger:A:PULse:RUNT:THReshold? (Query Only)
Returns the runt pulse trigger upper and lower threshold voltage values.
Trigger
TRIGger:A:PULse:RUNT:THReshold?
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
Group
Syntax

Table of Contents

Other manuals for Tektronix TDS3000 Series

Related product manuals