Command Descriptions
2- 304
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
<NR1> is the gain factor of the probe. TDS3014B/C, TDS3024B, TDS3034B/C,
TDS3044B, TDS3054B/C, TDS3064B only, these oscilloscopes do not
automatically detect the probe factor of a probe connected to the external trigger
connector.
TRIGGER:EXTERNAL:PROBE?
might return TRIGGER:EXTERNAL:PROBE 1.0E1 for a 10x probe.
TRIGger:EXTERnal:YUNit
(TDS3014B/C, TDS3034B/C, TDS3054B/C Only)
Sets or returns the external trigger vertical (Y) units value.
Trigger
TRIGger:EXTERnal:YUNit <qstring>
TRIGger:EXTERnal:YUNit?
<qstring> is “V” or “A”.
TRIGGER:EXTERNAL:YUNIT?
might return:TRIGGER:EXTERNAL:YUNIT “V”.
TRIGger:FORCe
If the trigger state is READY, this forces a trigger event. Otherwise it is ignored.
Trigger
TRIGger:FORCe
TRIGGER:FORCE
causes an immediate trigger event if the trigger state is ready.
Arguments
Examples
Group
Syntax
Arguments
Examples
Group
Syntax
Examples
To Next Page
Loading...
