Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 307
*TRG (Set Only)
(Trigger) executes commands that are defined by *DDT.
The Group Execute Trigger (GET) interface message has the same effect as the
*TRG command.
Miscellaneous
*TRG
*TRG
immediately executes all commands that have been defined by *DDT.
Alias commands, *DDT
*TST? (Query Only)
(Self-Test) Tests the GPIB interface and returns a 0.
Miscellaneous
*TST?
<NR1> and is always 0.
Group
Syntax
Examples
Related Commands
Group
Syntax
Returns
To Next Page
Loading...
