Status and Events
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
3-19
Table 3- 8: Execution warning messages - EXE Bit 4 (Cont.)
Code Message
545 Measurement warning, Invalid in minmax
546 Measurement warning, Need 3 edges
547 Measurement warning, Clipping positive/negative
548 Measurement warning, Clipping positive
549 Measurement warning, Clipping negative
Table 3--9 shows internal errors that indicate an internal fault in the oscilloscope.
Table 3- 9: Internal warning messages
Code Message
600 Internal warning
630 Internal warning, 50 Ω overload
To Next Page
Loading...
