Tektronix TDS3000 Series Program Manual

Command Groups
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-15
Table 2- 7: Cursor commands (cont.)
Header Description
CURSor:VBArs:HDELTa? Returns the horizontal diff erence between the
two vertical bar cursors
CURSor:VBArs:HPOS<x>? Returns the value of vertical bar ticks
CURSor:VBArs:POSITION<x> Sets the horizontal position for both vertical
bars
CURSor:VBArs:SELect Sets which vertical cursor is active (selected)
CURSor:VBArs:UNIts Sets or returns measurement units for the
vertical cursors
CURSor:VBArs:USE Sets measurement scale for the vertical
cursors
CURSor:VBArs:VDELTa? Returns the value difference between the
vertical bar ticks
CURSor:WAVEform:SELect Selects (makes active) the specified waveform
XY cursor
CURSor:XY:PRODDelta? Returns the value of the XY cursor product
delta readout
CURSor:XY:PRODUCT<x>? Returns the value of the product readout for
the specified XY cursor
CURSor:XY:RADIUS<x>? Returns the XY cursor radius val ue from the
0,0 origin to the specified XY cursor
CURSor:XY:RATDELta? Returns the XY cursor ratio delta value
CURSor:XY:RATIO<x>? Returns the cursor ratio value for the specified
XY cursor
CURSor:XY:RDELta? Returns the XY cursor radius delta val ue for
the polar readout.
CURSor:XY:READOUT Sets or returns the XY cursor readout format
CURSor:XY:RECTX<x>? Returns the XY cursor X-axis rectangular
coordinate value for the specified cursor
CURSor:XY:RECTY<x>? Returns the XY cursor Y-axis rectangular
coordinate value for the specified cursor
CURSor:XY:THDELta? Returns the XY cursor polar readout delta
theta value
CURSor:XY:THETA<x>? Returns the polar readout theta value for the
specified XY cursor
CURSor:XY:XDELta? Returns the difference (delta) between the
X-axis values of the two XY cursors
CURSor:XY:YDELta? Returns the value of the difference (delta)
between the Y-axis values of the two XY
cursors

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English