Tektronix TDS3000 Series Program Manual

Command Groups
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-29
Table 2- 20: Measurement commands (cont.)
Header Description
MEASUrement:IMMed:VALue? Returns measurement result
MEASUrement:INDICators? Returns all measurement indicator parameters
MEASUrement:INDICators:HORZ<x>? Returns the position of the specified horizontal
measurement indicator
MEASUrement:INDICators:STATE Sets and returns state of visible measurement
indicators
MEASUrement:INDICators:NUMHORZ? Returns the horizontal measurement indicators
MEASUrement:INDICators:NUMVERT? Returns the vertical measurement indicators
MEASUrement:INDICators:VERT<x>? Returns the position of the specified vertical
measurement indicator
MEASUrement:MEAS<x>? Returns parameters on measurement
MEASUrement:MEAS<x>COUNt?
(TDS3AAM)
Returns parameters on measurement
accumulated
MEASUrement:MEAS<x>:DATa? Returns measurement result and qualifier
MEASUrement:MEAS<x>:DELay? Returns delay measurement result and
qualifier
MEASUrement:MEAS<x>:DELay:
DIREction
Sets the starting point and direction to
determine the delay measurement
MEASUrement:MEAS<x>:DELay:
EDGE<x>
Sets the slope of the edge used for delay
measurement
MEASUrement:MEAS<x>:MAXimum?
(TDS3AAM)
Returns the maximum value for the specified
measurement since last statistical reset
MEASUrement:MEAS<x>:MEAN?
(TDS3AAM)
Returns the mean value accumulated for the
specified measurement since last statistical
reset
MEASUrement:MEAS<x>:MINImum?
(TDS3AAM)
Returns the minimum value accumulated for
the specified measurement since the last
statistical reset
MEASUrement:MEAS<x>:SOURCE Returns or sets measurement source
MEASUrement:MEAS<x>:SOURCE<x> Returns or sets the source for the specified
measurement
MEASUrement:MEAS<x>:STDev?
(TDS3AAM)
Returns or sets standard deviation values
accumulated for the specified measurement
since the last statistical reset
MEASUrement:MEAS<x>:STATE Turns measurement display on or off
MEASUrement:MEAS<x>:TYPe The measurement to be t aken
MEASUrement:MEAS<x>:UNIts? Returns units to use for measurement
MEASUrement:MEAS<x>:VALue? Returns measurement result

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English