Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-53
ALIas:DELEte:NAMe (Set Only)
Removes a specified alias. This command is identical to ALIas:DELEte.
Alias
ALIas:DELEte:NAMe <QString>
<QString> is the name of the alias to remove. Using ALIas:DELEte:NAMe
without specifying an alias causes an execution error. <QString> must be an
existing alias.
ALIAS:DELETE:NAME ”STARTUP”
deletes the alias named STARTUP.
ALIas:STATE
Turns aliases on or off. This command is identical to the ALIas command.
Alias
ALIas:STATE { OFF | ON | <NR1> }
ALIas:STATE?
OFF or <NR1> = 0 turns alias expansion off. If a defined alias is sent when
ALIas:STATE is OFF, a command error (102) is generated.
ON or <NR1> ¸ 0 turns alias expansion on. When a defined alias is received, the
specified command sequence is substituted for the alias and executed.
ALIAS:STATE OFF
turns the command alias feature off.
ALIAS:STATE?
returns 0 when the alias feature is off.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
