Save/Recall
3–46
TDS3000 Series User Manual
Deleting Files. To delete a file, select the file with the general purpose
knob, push the Delete screen button, and then push the OK Delete
screen button when you see the confirmation screen.
If you do not want to see a confirmation screen each time you delete
a file, push the Confirm Delete screen button to set it to Off.
Renaming Files. To rename a file, select the file with the general
purpose knob, push the Rename screen button, and then follow the
instructions on page 3–45.
Once a directory is created, you cannot rename it. However, you can
delete the directory and create a new one with a new name.
Copying Files and Directories. To copy a file or directory, select the file
or directory with the general purpose knob and push the Copy screen
button. Now use the general purpose knob and SELECT button to
select a destination directory. Push the copy confirmation screen
button to complete the operation.
Printing Files. You can print files through any installed printer port to
your printer. This function is especially useful if you want to print
hard copy files that you have stored on a disk.
To print a file, select the file with the general purpose knob. Push the
Print screen button and then select the port to which your printer is
connected. Make sure that the oscilloscope is set to send the correct
file format to your printer.
Creating a Directory. To create a directory, use the general purpose
knob and SELECT button to select the working directory where you
want the new directory to reside. Push the Create Directory screen
button and then follow the instructions on page 3–45.
To Next Page
Loading...
Need help?
General
