AFA4000/E VAV Airflow Controller / p.120
If the timer is enabled, set the time.
Select the required relay:
• None
• Output 1 – Output 3
Enable or disable the inhibit screen
feature.
Select the required relay:
• None
• Output 1 – Output 3
Select the required relay:
• None
• Output 1 – Output 3
Enable or disable the timer.
If the timer is enabled, set the time.
Select the required relay:
• None
• Output 1 – Output 3
Select the required relay:
• None
• Output 1 – Output 3
Select from:
• Maintain Low Air
• Reduce Low Air
If Reduce Low Air is selected, set the low
limit for the air flow.
Select the required relay:
• None
• Output 1 – Output 3