TEL AFA4000/E - Page 121

AFA4000/E VAV Airflow Controller / p.121
Menu item
Option
Instructions
Night Set Back
Mute
Night set-back mute
Enable or disable the night set-back mute.
External Alarm
LED on/off screen
Enable or disable the LED.
Display on / off
Enable or disable the display.
External alarm relay
Select the required relay:
• None
• Output 1 – Output 3
Fire Alarm
Fire alarm relay
Select the required relay:
• None
• Output 1 – Output 3
Protocol
Protocol
Select the required protocol:
• Modbus
• TEL PC
• BACnet
• TEL AFA5000
• TELBUS
Note: The TEL protocols are used to
connected to TEL Config Manager software
and the TEL AFA5000 Room Space
Controller, the Modbus Slave ID is used
when set to TEL protocol.
Modbus Settings
MODBUS settings menu
See section 8.1.1.3.
BACnet settings
BACnet settings menu
See section 8.1.1.4.
Sensor Error
Options
Buzzer on / off
Enable or disable the buzzer.
Sensor error relay
Select the required relay:
• None
• Output 1 – Output 3
Sash Warning
Timer
Sash warning time
Set the time.
Sash warn rpt alarm
Enable or disable the alarm.