User Manual
46
The following table describes the parameters of this page.
Field Description
Enable SAMBA Select the check box to enable the samba service
Workgroup Enter the name of your local area network (LAN).
Netbios Name
Enter your netbios name which is an identifier used
by netbios services running on a computer.
New SMB
password
Enter your samba password for user root.
Retype new SMB
password
Reconfirm your samba password here.
Enable USB
Storage
Select the check box to support USB storage.
Enable
Anonymous
Access
Select the check box to allow anonymous users
access.
3.3.5 3G WAN Configuration
Choose Advanced > 3G WAN Configuration. The page shown in the following
figure appears.
If you want to access the Internet through 3G connection, a 3G USB data card is
required. Connect the 3G data card to the USB interface of the Router and the
following will appear.
To Next Page
Loading...