User Manual
28
Field
Description
frames before transmitting over the wireless network.
Wi-Fi protected access (WPA) is a subset of the
IEEE802.11i security specification draft.
WPA2 Mixed is the collection of WPA and WPA2
encryption modes. The wireless client establishes the
connection between the modem through WPA or
WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
WPA
Encryption
When WPA or WPA2 is selected, you can select WPA
encryption as AES or TKIP+AES.
WPA Mode
Select PSK (Pre-Shared Key), enter the
pre-shared key in the Pre-Shared Key field.
Select Enterprise (RADIUS), enter the port, IP
address, and password of the Radius server. You need
to enter the username and password provided by the
Radius server when the wireless client connects the
modem.
If the encrypton is set to WEP, the modem uses 802.1
X authentication, which is Radius authentication.
Group Key
Update Interval
When WPA encryption is applied, messages sent are
encrypted with a password. For higher security, WPA
password is updated periodically. This value is the
update interval of the WPA password.
3.2.4 Local Network
You can configure the LAN IP address according to the actual application. The
preset IP address is 192.168.1.1. You can use the default settings and DHCP
service to manage the IP settings for the private network. The IP address of the
device is the base address used for DHCP. To use the device for DHCP on your
LAN, the IP address pool used for DHCP must be compatible with the IP address
of the device. The IP address available in the DHCP IP address pool changes
automatically if you change the IP address of the device.
To Next Page
Loading...