R309 AT Commands
©2015 Telegesis (UK) Ltd - 39 - AT Command Manual (Rev 3.09)
+BECOMETC – Make Local Device the Trust Centre
AT+BECOMETC
Local Device takes over the Trust Centre. Can
only be used if no other device in the network is
Trust Centre (i.e. the network has been started
in distributed Trust Centre mode)
Notes
Can only be used if Network has been started in
distributed Trust Centre mode (bit 9 of S0A set).
AT+BECOMETC causes the network key to be
updated.
Use on
Router that established the PAN in distributed
TC Mode
Response
OK
or
ERROR<errorcode>
<errorcode> represents the error code explained
in section 3.
+BECOMENM – Make the local device Network Manager
AT+BECOMENM
Local Device takes over role of Network
Manager. By default the COO is the Network
Manager, but any other router in the network
can take over this responsibility. The Network
Manager can change the radio channel and the
PAN ID.
Use on
Router
Response
OK
or
ERROR<errorcode>
<errorcode> represents the error code explained
in section 3.