Telegesis ETRX357-LR - Page 88

R309 AT Commands
©2015 Telegesis (UK) Ltd - 88 - AT Command Manual (Rev 3.09)
S1F – ADC0 Reading
Description
The analogue reading of ADC0
Valid only when bit 13 (0x0D) of S15 is set,
invalid otherwise
Operations
R LOCAL
R REMOTE
Becomes effective
Instantly
Storage
Instant Reading of analogue input
Parameters
XXXX
Representation
The hexadecimal reading of the analogue input
in mV * 10 with respect to ground. The return
value will be undefined in case the
corresponding A/D converter has not been
enabled.
Range
ETRX3: 0000 – 2EE0 (0 – 12000)
SW release
R300 ●
S20 – ADC1 Reading
Description
The analogue reading of ADC1
Valid only when bit 14 (0x0E) of S15 is set,
invalid otherwise
Operations
R LOCAL
R REMOTE
Becomes effective
Instantly
Storage
Instant Reading of analogue input
Parameters
XXXX
Representation
The hexadecimal reading of the analogue input
in mV * 10 with respect to ground. The return
value will be undefined in case the
corresponding A/D converter has not been
enabled.
Range
ETRX3: 0000 – 2EE0 (0 – 12000)
SW release
R300 ●