Telegesis ETRX357-LR - Page 89

R309 AT Commands
©2015 Telegesis (UK) Ltd - 89 - AT Command Manual (Rev 3.09)
S21 – ADC2 Reading
Description
The analogue reading of ADC2
Valid only when bit 15 (0x0F) of S15 is set,
invalid otherwise
Operations
R LOCAL
R REMOTE
Becomes effective
Instantly
Storage
Instant Reading of analogue input
Parameters
XXXX
Representation
The hexadecimal reading of the analogue input
in mV * 10 with respect to ground. The return
value will be undefined in case the
corresponding A/D converter has not been
enabled.
Range
ETRX3: 0000 – 2EE0 (0 – 12000)
SW release
R300 ●
S22 – ADC3 Reading
Description
The analogue reading of ADC3
Valid only when bit 17 (0x11) of S15 is set,
invalid otherwise
Operations
R LOCAL
R REMOTE
Becomes effective
Instantly
Storage
Instant Reading of analogue input
Parameters
XXXX
Representation
The hexadecimal reading of the analogue input
in mV * 10 with respect to ground. The return
value will be undefined in case the
corresponding A/D converter has not been
enabled.
Range
ETRX3: 0000 – 2EE0 (0 – 12000)
SW release
R300 ●