Parameter Description
Direct speak
Enables the delegate to switch his microphone on/off at
any time. The only limitation is the maximum amount of
active microphones.
When the option
Interrupt possible
is selected and the
maximum amount of active microphones is reached, then
the microphone that has been active the longest will be
switched off. (Chairman always has priority)
Activating the option
Push to talk
means the microphone
button needs to be pressed to be able to speak.
Request
When the delegate presses the microphone button, a
request is sent to the chairman or conference operator to
speak (to cancel the request, press the microphone button
again). Once the floor is requested, the microphone of the
first one in the queue will blink green, the other in the
queue have fixed green LEDs, meaning the unit is in
request mode.
The chairman or conference operator grants the participant
permission to speak by using the NEXT button or by
activating the microphone via the CoCon software( if
available).
By checking the
Cancel request allowed
option, the
delegate can cancel his request by pressing the microphone
button again.
CONF IGURE CONF ERENCE SETTING S 66
To Next Page
Loading...
