WE310G4-I/P Module Hardware User Guide
1VV0301767 Rev. 5 Page 45 of 48 2022-11-08
Not Subject to NDA
The system integrator is responsible for the functioning of the final product. Therefore,
the external components of the module, as well as any project or installation issue, have
to be handled with care. Any interference may cause the risk of disturbing the GSM
network or external devices or having an impact on the security system. Should there be
any doubt, please refer to the technical documentation and the regulations in force. Every
module has to be equipped with a proper antenna with specific characteristics. The
antenna has to be installed carefully to avoid any interference with other electronic
devices and has to guarantee a minimum distance from the body (20 cm). In case this
requirement cannot be satisfied, the system integrator has to assess the final product
against the SAR regulation.
The equipment is intended to be installed in a restricted area location.
The equipment must be supplied by an external specific limited power source in
compliance with the standard EN 62368-1:2014.
The European Community provides some Directives for the electronic equipment
introduced on the market. All the relevant information is available on the European
Community website:
https://ec.europa.eu/growth/sectors/electrical-engineering_en
To Next Page
