Available options:
• Update the records from database:
To update the listed records from database, click on the “Update list” button.
• Quick remote connect to the selected device:
To connect to the selected device, click on the “Quick connect” button. The
program will switch to the “Connection type” menu and start connecting
automatically.
• Creating a shortcut on the desktop, used to connect immediately to the selected device:
To create a shortcut on the desktop, click on the “Create desktop shortcut”
button.
• Adding new device contact details:
Click on the “Add new” button to add new device contact details.
• Creating a copy of existing contact details of a device:
To create a copy of the contact details of the selected device, click on the “Clone”
button. Please note that the new copy should have a different unique name.
• Editing existing device contact details:
To edit the contact details of the selected device, click on the “Edit” button.
• Deleting the contact details of a device:
To delete the contact details of the selected device, click on the “Delete” button.
Data stored by the device register:
Device name: you can enter a custom name for the device in this section.
Device ID: the unique identifier of the device. If the device is connected via USB *(and the SIM
card is installed), the program will read the identifier from the device and will paste it in this box
when you add new device contact details.
*Devices with firmware version earlier than V8.00 have used the identifier of the SIM card
(ICCID) installed, to identify the device in the system. Therefore, if your device has been
updated from a version earlier than V8.00, and a remote access password was configured in
the device before the update, then the device will continue to use the SIM identifier for
identification purposes.
Server: in case of using a proxy, for connecting remotely to the device, it is possible to configure
a server IP address and port number different from the default server, by adding a new server in
the “Server register” menu. If there are further servers recorded, you can choose in this
drop-down menu a connection option for the given device from the recorded servers.
The “Server register” menu is hidden by default, since it in most cases using it is not necessary.
You can find the option used to enable showing this menu in the “Software settings / Settings”
menu.
Username: the username of the user recorded in the “Remote access” menu in the settings of
the given device, authorized to connect remotely to the device.
Remote access password / Confirm password: the password configured for the given user in
the “Remote access” menu in the settings of the given device, used to connect remotely to the
device.
To Next Page
