5.2.2 Inputs
In this menu you can configure the properties and options of the contact inputs IN1…IN4.
The system generates input events when the contact inputs are triggered. You can configure
notifications for each input event in the “Input events” menu, which will be sent to the phone
numbers configured in the “Reporting channels” menu.
You can read more about input functions under the “Operation of the contact inputs”
paragraph.
Available options:
• Reading the settings from the device:
To read the settings from the device click on the “Read settings” button. This will
read all settings in all menus in the “Device settings” menu group.
• Writing the settings into the device:
After changing the settings or entering new settings, to take effect in the system,
it is necessary to write the settings into the device by clicking on the
“Write settings” button. This will write into the device the values changed in the
menus in the “Device settings” menu group.
Please note that after you make changes, you must write the settings into the device
to be applied. For this, click on the “Write settings” button.
To Next Page
