5 Gate Control programming software usage and feature descriptions
5.1 Connection menu group
5.1.1 Viewing the settings options and configuring offline
The Gate Control programming software supports all Gate Control BASE and PRO device
models, therefore the software shows the settings options available specifically in a given device
model, which are different from the common parameters (e.g., differences between the BASE
and the PRO, or device models with a different user capacity) only when the given device model
is connected, i.e., a Gate Control BASE or PRO device has to be connected in order to show
the specific settings options for that device model.
However, using the “Offline device selector” it is possible to view the settings options of the
Gate Control BASE device and to configure and save the settings in advance offline, without
connecting the device.
If you want to view the settings options of a Gate Control BASE or PRO device model, or to
configure and save settings without connecting the device, click on the arrow found next to the
“Offline device selector” button, select the desired device model from the drop-down
menu and then click on the “Offline device selector” button to load the settings options of
the selected device model.
To Next Page
