• After the connection has been successfully established, you can read and change settings,
manage users, download event logs, and view device status information, depending on your
access level.
• To close the connection, click on “Disconnect” button.
Attention! If you are using the device variant equipped with a 2G modem, or the device is
connected to the 2G network, when using functions that make an outgoing call, the Internet
connection will be interrupted for the duration of the call, because the 2G network does not
support voice calls and mobile Internet usage at the same time. In such a case, an outgoing call
will block the Internet connection, i.e., a possible remote connection in progress will be
suspended for the duration of the call.
Functions that make outgoing calls:
- notification by call upon activating a contact input
To Next Page
